Godrej Crash Resistant Barrier
Godrej Crash Resistant Barrier, Protect entryways from unauthorized vehicles with a high impact load bearing barrier.
Technical Specification
Clear passage width (m): 3-6
Height of pole above ground (m) approx: 0.9
Drive: Electro-mechanical
Electronic motor capacity
Main voltage supply: 230 V
Power frequency: 50-60 Hz
Nominal power: 0.3 kW
Drive unit: Worm gear drive
Torque: 170 Nm
Protection class: IP55
Controller type: PLC
Power failure/Emergency operation: By friction clutch
Impact rating (Approx kN): 350
Environment
Temperature: -15 to +60 degree C
Humidity: 90%
Barrier housing (approx mm): Steel 450x400x1180
Boom length (Clear opening)(approx m): 6
Operation time (approx s): 9-12 (Depending on boom length & impact rating)
Additional Info
Brand: Godrej
Feature
Barrier pole: Heavy-duty metal profile with steel rope/chain support according to statistical requirements.
Pole support: 1 no. steel rest posts with pole lead-in, side support and rubber buffer.
The rest post also acts as impact resistance in case of violent attacks while the barrier pole is in a closed position and locks the boom preventing the boom from lifting from below in case of a crash.
The barrier pole is bolted to a wishbone-mounting pivoting on ball bearings.
The bottom part of the casing consists of the base plate with an opening for cable conduits and bores for the anchor bolts.
Roller bearings of barrier pole is equipped with life lubrication.
Barrier drive: Electro-mechanical drive unit with gear motor in adequate size, 230 V, 50 Hz.
Electrical control and control equipment: The electrical PLC control for the barrier with all necessary switching elements and dry contacts is located inside the barrier stand casing.
1 no. guard house push-button set "open-close" (box type) included.